Margins appear in borderless prints – Epson SureColor P20000 Standard Edition 64" Large-Format Inkjet Printer User Manual

Page 206

206

• If ink is smeared on your prints, clean the rollers. Load blank paper and press the

cut/feed

media button to feed it through the printer.

• If you are using non-Epson media, make sure you created a custom paper configuration for the media.

• Make sure the

Paper Size Check

setting is set to

, or the printer may print outside the edges of the

loaded paper and smear ink on the back of the print.

• If the

Auto Cut

setting is set to

Off

, try setting the

Margin Per Page

setting to

65mm

• Depending on the print density and type of paper you are using, the ink may take a while to dry. Do not

stack prints until the ink is completely dry.

• Clean around the print head.

Parent topic:

Solving Print Quality Problems

Related references

Paper Menu Settings
Setup Menu Settings

Margins Appear in Borderless Prints

If borderless prints still have margins, try these solutions:

• Check the print settings selected in your print application you are using, as well as the printer driver.

• Make sure that the paper settings on the LCD screen match the paper you loaded.

• Paper that is stored incorrectly may expand or contract. Make sure you have stored the paper

according to the manufacturer's specifications.

• Check that the paper you are using supports borderless printing.

• If you are using roll paper, change the

Adjust Cut Position

setting. This may reduce the margins at

the leading edge of the print.

Parent topic:

Solving Print Quality Problems

Related references