Epson SureColor P20000 Standard Edition 64" Large-Format Inkjet Printer User Manual
Page 192
192
LCD screen message
Condition/solution
Reel Unit Disconnected
Auto Take-up Reel Unit
is disconnected. Do you
continue?
The optional Auto Take-up Reel is not connected. Reconnect the unit and
select
No
on the LCD screen to turn off the printer. Wait a moment, then turn
the printer on.
To continue printing without the Auto Take-up Reel, select
Yes
on the control
panel.
Take-Up Error
Is anything obstructing
the take-up reel sensor
system?
The optional Auto Take-up Reel cannot take up media.
Check the optional Auto Take-up Reel sensor and clear any obstructions,
then press the
OK
button on the control panel.
If there is any loose paper on the Auto Take-up Reel roll core, set the
Auto
switch to
Off
and hold the
Manual
switch in the take-up direction to remove
slack in the roll paper. Confirm that the paper is attached to the roll core
correctly, then return the
Auto
switch to the original position and press the
OK
button.
HDD Error
HDD used for another
printer needs to be
formatted. Continue?
The inserted hard drive is not formatted or is formatted for another printer.
You must format an internal print server that has been used with another
printer before using it with your product. Select
Yes
on the LCD screen to
format the drive or you will not be able to print with the internal print server.
Storage Error
Check if hard disk unit is
correctly installed.
The internal print server cannot store the current print job.
Press the
pause/cancel button and select
Job Cancel
, then remove and
reinstall the internal print server.
If the message still appears, contact Epson for support.
To continue printing regardless of the internal printer server's status, select
Print only
from the
Hard Disk Unit
menu in the printer driver.
Data Size Error
Data size of print job is
too large. Check on print
job.
The internal print server can store individual print jobs that are up to 100GB
in size. To print larger jobs, select
Print Only
from the
Hard Disk Unit
menu
in the printer driver.