Epson SureColor P20000 Standard Edition 64" Large-Format Inkjet Printer User Manual

Page 204

204

• Shake the cartridges before installing them in the printer. To maintain optimum print quality, remove

and shake the installed cartridges every three months.

• Make sure you selected the correct

Media Type

setting in the printer driver that matches the paper

loaded in the printer.

• Compare the print result with the image on your computer screen. Since monitors and printers

produce colors differently, printed colors and screen colors do not always look the same.

• Make sure that the front cover is closed during printing.

• Check the ink levels on the LCD screen. Replace any cartridges that are low on ink.

• Enable color management in the software application or in the printer driver.

• If you are using non-Epson media, make sure you created a custom paper configuration for the media.

• Check the quality setting that you selected in the printer driver. Using a faster printing method may

decrease the overall print quality.

• If you are printing on roll paper, cut approximately 3 inches (76 mm) off the end of the roll. Because

the leading edge is in contact with the air, the paper quality may decline over time.

• Enable the

Optimize media edge print quality

setting in the printer driver.

• Check the paper feed sensor. If the sensor is dirty, clean it.

• Make sure the

Paper Feed Stabilizer

setting on the LCD screen is set to

• Check the cloth in the paper slot. If you see dust or paper particles, clean it with a cleaning sheet.

Parent topic:

Solving Print Quality Problems

Related concepts

Related references

Related tasks

Cleaning the Paper Feed Slot