Sony MAS-A100 IP-Based Ceiling Beamforming Microphone - Manual (Page 88)

88
Specifications (continued)
Input/output
• XLR/TRS jack(s)
MIC (MIC ATT: 0)
Input impedance: 32 kΩ (phantom power: OFF)
Rated input level: -48 dBu
Minimum input level: -58 dBu
LINE
Input impedance: 12 kΩ
Rated input level: +6 dBu
Minimum input level: -3 dBu
Maximum input level: +12 dBu
• Headphone jack (stereo mini-jack)
Rated output level: 400 mV
Maximum output level: 35 mW + 35 mW or above (load impedance: 16 Ω)
Recommended load impedance: 16 Ω to 32 Ω
• LINE OUT jack (stereo mini-jack)
Output impedance: 220 Ω
Rated output level: +4 dBV
Recommended load impedance: 22 kΩ
• USB port (USB Type-C port) Hi-speed USB compatible
• Card slot: SD card slot
Playback speed control
(DPC)
• 1.00 times - 0.25 times:
FLAC files with the sampling frequency at 88.2 kHz or above
• 2.00 times - 0.25 times:
LPCM files with the sampling frequency at 88.2 kHz or above, FLAC files
with the sampling frequency below 88.2 kHz
• 3.00 times - 0.25 times: other than the above
Speaker maximum power
output
200 mW
Power requirements
Four LR6 (size AA) alkaline batteries (supplied): 6 V DC
Four nickel metal hydride rechargeable batteries NH-AA (not supplied):
4.8 V DC
Ambient conditions
Operating temperature: 5 °C - 35 °C (41 °F - 95 °F)
Operating humidity: 25 % - 75 %
Storage temperature: -10 °C - +45 °C (14 °F - 113 °F)
Storage humidity: 25 % - 75 %
Dimensions (not including
projecting parts and
controls)
Approx. 80.2 mm x 197.6 mm x 37.4 mm (3.16 in x 7.78 in x 1.48 in)
(Width/Height/Depth)
Mass Approx. 480 g (16.94 oz) (including batteries)
Supplied accessories See page 18