Sony MAS-A100 IP-Based Ceiling Beamforming Microphone - Manual (Page 46)

46
Playing the file immediately after it is
recorded
Stop recording and press the  button while
the recording standby screen is displayed.
Fast forwarding/reversing during
playback (cueing/reviewing)
While playback is on standby or in progress,
press and hold the
 (fast reverse/review)
button or  (fast forward/cue) button to
search for the desired point and release the
button.
Hint
Forward or backward search begins at a slow speed,
which helps you check the file word by word. If you
keep holding either button, forward or backward
search will continue at a faster speed.
Playing a specific section repeatedly
(A-B repeat)
You can specify the starting point A and the
finishing point B in a file to play the section
between the specified points repeatedly.
1 While playback is on standby or in
progress, press the  A-B button to
specify the starting point A.
Set End of A-B Repeat
2 Press the  A-B button again to
specify the finishing point B.
The specified section plays repeatedly.
3 To resume the normal playback, press the
 A-B button again.
Note
While playback is on standby, you cannot specify the
same point as the starting point A and the finishing
point B. An attempt to do this cancels the specified
starting point A.
Repeatedly playing the current file
You can repeat playback of the file you are
currently playing by simply pressing and
holding the
 button. To cancel this function,
press the  or  STOP button.
Hint
• You can turn on the button-hold repeat playback
function while the linear PCM recorder is in a
particular Play Mode.
• You cannot turn on the button-hold repeat playback
function while the A-B repeat playback function is
active.
Locating a playback point with the track
mark list
You can locate a playback point by simply
selecting a track mark on the Track Mark List
screen.
Key Change
Easy Search
Play Mode
Playback Range
Delete a File
Protect
Track Mark List
While playback is on standby or in progress,
select “Track Mark List” on the OPTION menu
and then select the desired track mark.
Other playback operations