Sony MAS-A100 IP-Based Ceiling Beamforming Microphone - Manual (Page 69)

69
Editing
Menu Item Settings (*: Default setting)
Playback
Settings Play Mode You can select the Play Mode setting, such as shuffle playback or
repeat playback, according to your purpose.
Normal*:
Plays the files in the specified range one by one.
Repeat: Plays the files in the specified range repeatedly.
1 File Play: Plays the current file to the end and stops.
1 File Repeat: Plays the current file repeatedly.
Shuffle:
Plays the files in the specified range at random.
Shuffle Repeat: Plays the files in the specified range repeatedly
at random.
Playback Range You can select a file search category (“Latest Recording,” “Search
by REC Date,” “Folders”) to search “ Recorded Files” for files and
specify the playback range for the list of search results.
All Range:
Plays all files in the results of searching
“ Recorded Files.”
Selected Range*: Plays all files that are contained in the
folder (recording date, artist name, album
title, etc.), including the current playing file.
Common
Settings LED The peak level indicators,  REC indicator, and  REC PAUSE
indicator light up or flash to represent the operational status of
the recorder.
ON*: The indicators light up or flash.
OFF: The indicators do not light up or flash.
Note
The Phantom power indicator does not go out even while “LED”
is set to “OFF.”
Backlight You can select a period of time to turn on and off the backlight of
the display window.
Only by LIGHT Key: The backlight lights or goes out only when
you press the LIGHT button.
20sec*: The backlight lights for 20 seconds when you
operate the linear PCM recorder.
1min: The backlight lights for 1 minute when you
operate the linear PCM recorder.
Always-ON: The backlight stays lit.
When “Always-ON” is selected, the battery quickly runs out of
power.
Beep You can turn the operation beep sound on or off.
ON*: A beep sounds.
OFF: No beep sounds.