Sony Planar T* FE 50mm f/1.4 ZA Lens - Manual (Page 5)

5
100% or more level without compressing the
brightness parts.
 You can check the bright portions exceeding
the displayable brightness of the unit by
decreasing the contrast.
On Fan Error
The unit has a built in fan for cooling. When the
fan stops and the

(Power) switch indicator
(page 9) blinks in red, turn off the power and
contact an authorized Sony dealer.
On Dew Condensation
If the unit is suddenly taken from a cold to a
warm location, or if ambient temperature
suddenly rises, moisture may form on the outer
surface of the unit and/or inside of the unit. This
is known as condensation. If condensation
occurs, turn off the unit and wait until the
condensation clears before operating the unit.
Operating the unit while condensation is present
may damage the unit.
Notes on Security
 SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
 This unit is equipped with a maintenance
function performed via a network.
Maintenance may be performed with your
consent.
 This product is used with a leased line or
intranet connection. Do not connect to an
external network, as security issues may occur.
On Long Periods of Continuous Use
Using this unit for extended periods may cause
eyestrain or reduction of eyesight.
As soon as you feel physical discomfort or pain,
stop using this unit immediately and take a
break.
If the physical discomfort or pain remains even
after taking a break, consult a physician.
Handling and Maintenance of the Screen
The surface of the screen is specially coated to
reduce image reflection. Make sure to observe
the following points as improper maintenance
procedures may impair the screen’s
performance. In addition, the screen is
vulnerable to damage. Do not scratch or knock
against it using a hard object.
 Be sure to disconnect the AC power cord from
the AC outlet before performing maintenance.
 The surface of the screen is specially coated.
Do not attach adhesive objects, such as
stickers, on it.
 The surface of the screen is specially coated.
Do not touch the screen directly.
 Wipe the screen surface gently with the
supplied cleaning cloth or a soft dry cloth to
remove dirt.
 Stubborn stains may be removed with the
supplied cleaning cloth, or a soft cloth slightly
dampened with a mild detergent solution.
 The screen may become scratched if the
cleaning cloth is dusty.
 Never use strong solvents such as alcohol,
benzene, thinner, acidic or alkaline detergent,
detergent with abrasives, or chemical wipe as
these may damage the screen.
 Use a blower to remove dust from the screen
surface.
Transportation of the Unit
Do not subject the unit to severe vibration or
high impact conditions during transportation.
Doing so may result in deformation of the
internal structure or exterior of the unit, damage
of the screen, malfunction of the internal parts,
or other damage.
Make sure not to expose the unit to strong
vibration or high impact when you transport the
unit as cargo by truck, ship, or air, or as luggage
with a rolling luggage bag.
Avoid transporting or carrying the unit with the
display facing up or down.
Caution
Use of the Protection Panel (sold separately) is
recommended for panel protection when
transporting the unit on its own.