Sony Planar T* FE 50mm f/1.4 ZA Lens - Manual (Page 24)

24
User LUT
3D LUT files (Cube files) created with the RAW
Viewer software or color grading tool can be
loaded from a USB memory.
Loading 3D LUT files to the monitor
3D LUT files are loaded to the monitor.
To apply the loaded 3D LUT files to the input
signals, you need to configure “User LUT”
(page 23) of “Ch. Setting” in the “User Preset
Setting” menu.
1
Save the desired 3D LUT files to the following
folder in the USB memory.
MSSONY/MONITOR/USER_LUT
Notes
 The USB memory is only FAT32 format-
compatible.
 Cube files with the following conditions
can be loaded.
File format: Adobe .cube (Cube files do not
support optional descriptions. Do not
include an optional description in .cube
file.)
Number of lattice points: 17 or 33
 The loading 3D LUT file should be named
up to a total of 20 alphanumeric characters
(one-byte characters) including “-” and “_”
(excluding extension).
 Up to 14 characters of the 3D LUT file name
are displayed in the menu of the monitor.
 Up to 1,000 3D LUT files can be saved in the
USB memory.
2
Connect the USB memory with the saved 3D
LUT files to the USB connector on the
monitor.
3
Select the LUT data number to be saved
under “User LUT” in the “User Preset Setting”
menu.
Copy From Select from the following items to copy
the selected color temperature data.
 D65
 D93
 D60
 DCI
 User1 to User10
Note
The color temperature data is used
commonly regardless of the signal
format or the EOTF setting. When the
color temperature is adjusted under
certain conditions, the adjusted result
is reflected in all displays on which the
same color temperature data is set.
Signal Select the signal to adjust the color
temperature.
 Internal: Select to adjust the color
temperature by using the
internal signal.
 External: Select to adjust the color
temperature by using the
signals input from an external
device.
Submenu Setting
User LUT1 to User
LUT30 Select the LUT data number to be
adjusted.
Note
To apply the 3D LUT file, you need to
load the 3D LUT file to the monitor in
advance. For details, see “Loading 3D
LUT files to the monitor” (page 24).
Load From USB Loads 3D LUT files to the monitor.
For details, refer to “Loading 3D LUT
files to the monitor” (page 24).
Delete Deletes the 3D LUT files loaded in the
selected LUT data number.
Submenu Setting
Delete All Deletes all of the 3D LUT files loaded to
the monitor.
Submenu Setting