Sony Planar T* FE 50mm f/1.4 ZA Lens - Manual (Page 29)

29
Monitoring Tool menu
The monitoring function for the input video
signal and recording assistance function are
configured.
Scopes
Submenu Setting
Display
WFM Sets whether to display WFM (Wave
Form Monitor). Select “On” to display
the waveform.
1) The signal tone is displayed when EOTF is set to 2.2, 2.4,
2.6, or 2.4(HDR). The brightness value of the input signal is
displayed when EOTF is set to SMPTE ST 2084. When EOTF
is set to ITU-R BT.2100(HLG), the brightness value of the
input signal when the maximum brightness of the monitor
is 1000 cd/m
2 is displayed. When EOTF is set to S-Log3 or S-
Log3(Live HDR), the brightness value when the S-Log3
signal is displayed in HDR(Live) is displayed.
Signal level (%)
Waveform
Signal tone or
brightness value
1)
Type of the waveform
Vector Sets whether to display Vector (vector
scope). Select “On” to display the color
difference components of the video
signal as vectors.
ALM Sets whether to display the audio level
meter. Selecting “On” displays the
eight audio level channels. The eight
channels set for “Left Audio” and
“Right Audio” in “Audio Preset” are
automatically set on the eight
channels displayed.
Submenu Setting
Red
Color target frame (The outer frame
indicates 100 %, and the inner frame
indicates 75 %.)
Magenta
Blue
Cyan Green
Black
Yellow
9 10 11 12 13 14 15 16
Channel number
(The eight channels are displayed, including the
channel which is selected. The selected channels
are displayed in light blue.)
Audio level