Serial remote menu, Security menu, Serial remote menu security menu – Sony Sonnar T* FE 55mm f/1.8 ZA Lens User Manual

Page 37: Select the desired user lut file

The files are displayed in numerical and
alphabetical order. When more than 6 files
are saved, selecting the “Previous 5 Data” or
“Next 5 Data” displays other files.

Select the desired User LUT file.

Select “Confirm” on the “Load From USB
Memory” screen.

The User LUT file is loaded from the USB
memory to the monitor. “In Progress” is
displayed while loading the file and LEDs on
the function buttons light in order from F1 to
F7.
When loading has completed, the User LUT
file name is displayed next to the selected
User LUT number.

Note

If the User LUT file is not compatible with the
file format that can be loaded to the monitor,
the file name is not displayed next to the
selected User LUT number and the loading
terminates.

Serial Remote menu

Note

The “Controller” menu is available when the
menu is displayed via the controller. (Only when
the controller is connected with the Peer to Peer
connection or Single connection.)

Security menu

Submenu

Setting

Monitor

Sets the monitor setting.

Network Setting



Monitor ID:

Sets the ID of the

monitor. (Default value: 1)



Group ID:

Sets the group ID of the

monitor. (Default value: 1)



IP Address:

Sets the IP address.

(Default value: 192.168.000.001)



Subnet Mask:

Sets the subnet mask.

(Default value:
255.255.255.000)



Default Gateway:

Sets the default

gateway On or Off. (Default
value: Off)



Address:

Sets the default gateway.

(Default value:
000.000.000.000)



Cancel:

Selects to cancel the setting.



Confirm:

Selects to save the setting.

Connection

Sets the connection of the monitor and
the controller.



Peer to Peer:

for one to one

connection



LAN:

for connection via a network

Controller

Sets the controller setting.