Sony Sonnar T* FE 55mm f/1.8 ZA Lens - Manual (Page 31)

31
Audio Setting
Internal Signal Setting
Gamut Marker Setting
1) For detecting the color space, use the following definitions
of the transmission gamma based on the selected EOTF.
Submenu Setting
SDI Audio Setting Sets the audio channel when SDI
signal is input.
 Left Audio: Select from channels
“CH1” to “CH16.” (Default value:
CH1)
 Right Audio: Select from channels
“CH1” to “CH16.” (Default value:
CH2)
When a channel from “CH1” to “CH8” is
selected in “Left Audio,” you cannot
select a channel other than a channel
from “CH1” to “CH8” (e.g.: CH9) in
“Right Audio.”
When a channel from “CH9” to “CH16”
is selected in “Left Audio,” you cannot
select a channel other than a channel
from “CH9” to “CH16” (e.g.: CH1) in
“Right Audio.”
Submenu Setting
Internal Signal Turns the internal signal display On/
Off.
 On: The internal signal is displayed.
 Off: The internal signal is not
displayed. (Default value)
Pattern Select the pattern of the internal
signal.
 PLUGE
 Gray
 White (Default value)
 5 Step
 Ramp
 Color Bars
Submenu Setting
Gamut Marker Turns the gamut marker On/Off. The
zebra pattern can be displayed for the
signal outside of the targeted color
space while “ITU-R BT.2020” is selected
for “Color Space.”
 On: Displays the gamut marker.
 Off: Disables the gamut marker
function. (Default value)
Target Sets the targeted color space.
The zebra pattern can be displayed for
the signal outside of the selected color
space.
1)
 ITU-R BT.709 (Default value)
 DCI-P3
Notes
 The setting is available while “ITU-R
BT.2020” is selected for “Color
Space.”
 The setting does not depend on the
status of picture control functions
such as contrast, chroma or white
balance.
 When the input signal which is
included the noise composition is
over the targeted color space, the
zebra pattern display may
emphasize the noise.
Type  Type1: Displays the black zebra
pattern. (Default value)
 Type2: Displays the black & white
zebra pattern.
The EOTF’s selection on the
unit The definitions used while
detecting the color space
2.2, 2.4, 2.6, CRT, 2.4(HDR) ITU-R BT.2020
S-Log3(HDR), S-Log3(Live HDR) sLog3
S-Log2(HDR) sLog2
SMPTE ST 2084(HDR) SMPTE ST 2084
ITU-R BT.2100(HLG) ITU-R BT.2100