Connecting the sdi signals – Sony Sonnar T* FE 55mm f/1.8 ZA Lens User Manual
Page 14
14
PARALLEL REMOTE connector
Used for future expansion. It is currently
unavailable.
SDI 2 IN (SDI 2 input) connectors (BNC)
Input connectors for serial digital signals.
For details, see “Connecting the SDI Signals”
(page 14).
Note
When the 12G-SDI or 6G-SDI signal is input to the
SDI 2 IN connectors, the 12G-SDI cable (L-
5.5CUHD manufactured by Canare Electric Co.,
Ltd. or an equivalent cable) is recommended.
SDI 2 OUT (SDI 2 output) connectors (BNC)
Output connectors for serial digital signals.
The
to
connectors output the signal that is
input to the corresponding SDI 2 IN connector.
Notes
SDI output is not activated when the unit is
turned off.
When the 12G-SDI or 6G-SDI signal is output
from the SDI 2 OUT connectors, the 12G-SDI
cable (L-5.5CUHD manufactured by Canare
Electric Co., Ltd. or an equivalent cable) is
recommended.
AC IN socket
Connect the supplied AC power cord.
Main power switch
Press
to provide power supply to the unit.
Connecting the SDI Signals
The following signals can be input to the SDI 1 IN and SDI 2 IN connectors of this unit.
Input signal
Connector
Maximum
SDI 1 IN
SDI 2 IN
Single Link
3G/HD-SDI
-
1 to 4
1 to 4
8 channels
12G/6G-SDI
-
-
1, 3
2 channels
Dual Link
3G/HD-SDI
3G/HD-SDI Link 1
1
1
4 channels
3G/HD-SDI Link 2
2
2
3G/HD-SDI Link 1
3
3
3G/HD-SDI Link 2
4
4
Quad Link
(2-sample interleave
division)
3G/HD-SDI
3G-SDI Link 1
1
1
2 channels
3G-SDI Link 2
2
2
3G-SDI Link 3
3
3
3G-SDI Link 4
4
4
Quad Link
(Square division)
3G/HD-SDI
Mapping signal of Sub image 1 (upper-left screen)
1
1
2 channels
Mapping signal of Sub image 2 (upper-right screen)
2
2
Mapping signal of Sub image 3 (lower-left screen)
3
3
Mapping signal of Sub image 4 (lower-right screen)
4
4