Sony E 15mm f/1.4 G Lens - Manual (Page 38)

38
When you access the Setup page for the first time,
input “root” as the user name and “Projector” as
the password in the authentication dialog.
When you log in for the first time, the window that
prompts you to change the password is displayed.
Follow the instructions on the screen to change
the password.
The name of the administrator is preset to “root.”
The password can be changed in the Password
page in the Setup page.
The password of the administrator and user
should be 8 to 16 characters that includes both
alphabet and numeric characters. Alphabet is
case-sensitive.
The default password “Projector” cannot be set as
a new password.
If you forget your password, consult with qualified Sony
personnel.
The password will be reset with your permission.
You can confirm the current settings for the
projector on the Information page.
You can control the projector from the computer
on the Control page.
The functions of the buttons shown in the
operation area are the same as those of the keys
on the supplied Remote Commander.
Set the e-mail report function on the Setup page.
Entered values will not be applied unless you click
on [Apply].
 The e-mail report function is not available on the
network where Outbound Port25 Blocking is used and
cannot connect to the SMTP server.
 You cannot enter the following characters in the text box:
“ ' ”, “ “ ”, “ \ ”, “ & ”, “ < ”, “ > ”
Note
Entry area for
[Administrator] Entry area for [User]
Confirming the Settings for the Projector
Operating the Projector from a Computer
Using the e-mail Report Function
Notes
Information area
Operation area