Sony E 15mm f/1.4 G Lens - Manual (Page 15)

15
Installing the Optional
Adaptor
When installing an optional adaptor (not supplied) into the
optional adaptor slot on the terminals of the projector, you
can use the optional adaptor as INPUT F.
 Be sure to retain the optional slot cover removed when
installing the optional adaptor. When removing the
optional adaptor, attach the cover.
 For details on available optional adaptors, see “Optional
accessories” (page 54).
 Do not install optional adaptors other than the one
specified as the optional accessory.
 For details on how to use, also refer to the operating
instructions of the optional adaptor.
1
Turn off the projector, then unplug the AC
power cord from the wall outlet.
2
To remove the optional slot cover attached to
the terminals, press the lower part of the
optional slot cover.
3
Insert the optional adaptor as far as it goes.
4
Tighten the two screws on the optional
adaptor.
Notes
Optional slot
cover
Example: 3G-SDI INPUT Adaptor
(not supplied)