Sony E 15mm f/1.4 G Lens - Manual (Page 12)

12
Connecting to a computer/video device
INPUT E
Connecting to a network equipment (using an HDBaseT terminal)
The HDBaseT terminal is used when connecting the projector to a network equipment to control the
projector.
 When using network features, be sure to check if “LAN Setting” is set to “via HDBaseT” (page 31).
 Connect the projector directly to the HDBaseT transmitter without going through a hub or router.
 Set “Extron XTP” in the Connection/Power menu to “On” when connecting to XTP Systems manufactured by Extron
Electronics (page 31).
Notes
Computer
LAN cable: STP cable with CAT5e or
higher (straight type) (not supplied)
HDMI output
terminal
HDMI cable
(not supplied)
HDBaseT transmitter
HDMI output
terminal
Video device
LAN cable (straight type)
(not supplied)
Wired connection
Wireless connection
Computer
LAN
terminal
Tablet PC/Smartphone
Computer
Hub, wireless router
HDBaseT transmitter
LAN cable: STP cable with CAT5e or
higher (straight type) (not supplied)
When you monitor and control the projector via the network, access the Setup page of the projector (page 41) via a Web
browser and enable the desired control protocol.