Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 90)

90
Navi MFX List
Parameter Value Explanation
Loop Mode OFF, AUTO, ON
If this is AUTO, the loop automatically turns on/off in synchronization with
the rhythm.
If the effect is recalled with this ON, this parameter must first be set to
something other than ON in order to make the loop operate.
Level 0–127 Output Level
Lo-fi
48 LOFI Comp (Lo-Fi Compressor)
Degrades the sound quality.
Compressor Compressor Lo-Fi Lo-Fi
2-Band 2-Band
EQ EQ
Compressor Compressor Lo-Fi Lo-Fi
2-Band 2-Band
EQ EQ
L in L in L out L out
R out R out R in R in
Parameter Value Explanation
Pre Filter 1–6
Selects the type of filter applied to the sound before it passes through the
Lo-Fi effect.
1: Compressor off
2–6: Compressor on
LoFi Type 1–9
Degrades the sound quality. The sound quality grows poorer as this value
is increased.
Post Filter OFF, LPF, HPF
Selects the type of filter applied to the sound after it passes through the
Lo-Fi effect.
OFF : No filter is used
LPF : Cuts the frequency range above the Cutoff Freq
HPF: Cuts the frequency range below the Cutoff Freq
Cutoff 200–8000 [Hz] Basic frequency of the Post Filter
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance D100:0W–D0:100W Volume balance between the direct sound (D) and the effect sound (W)
Level 0–127 Output Level