Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer - Manual (Page 104)

104
Navi
Parameter Value Explanation
Tx PC OFF, ON
Specifies whether program change messages will be transmitted (ON) or
not be transmitted (OFF).
Tx Bank OFF, ON
Specifies whether bank select messages will be transmitted (ON) or not be
transmitted (OFF).
Tx Edit OFF, ON
Specifies whether changes you make to a parameter are transmitted as
system exclusive messages (ON) or not (OFF).
Rx PC OFF, ON
Specifies whether program change messages will be received (ON) or not
be received (OFF).
Rx Bank OFF, ON
Specifies whether bank select messages will be received (ON) or not be
received (OFF).
Rx Exclusive OFF, ON
Specifies whether system exclusive messages will be received (ON) or not
be received (OFF).
Rx Bend OFF, ON Specifies whether pitch bend is received (ON) or not received (OFF).
Rx Poly Pres OFF, ON
Specifies whether polyphonic aftertouch is received (ON) or not received
(OFF).
Rx Ch Pres OFF, ON
Specifies whether channel aftertouch is received (ON) or not received
(OFF).
Rx Mod OFF, ON Specifies whether modulation is received (ON) or not received (OFF).
Rx Volume OFF, ON Specifies whether volume is received (ON) or not received (OFF).
Rx Pan OFF, ON Specifies whether pan is received (ON) or not received (OFF).
Rx Exp OFF, ON Specifies whether expression is received (ON) or not received (OFF).
Rx Hold-1 OFF, ON Specifies whether hold 1 is received (ON) or not received (OFF).
Rx StartStop OFF, ON Specifies whether start/stop is received (ON) or not received (OFF).
SYSTEM USB SYSTEM USB
USB In Lev 0–127 Adjusts the audio input level of the USB COMPUTER port.
USB Out Lev 0–127 Adjusts the audio output level to the USB COMPUTER port.
USB Audio Thru OFF, ON
Specifies whether the audio input of the USB COMPUTER port is mixed
into the audio output of the USB COMPUTER port. If you don’t want it to
be output as audio, turn this OFF.
USB-MIDIThru OFF, ON
Specifies whether MIDI messages received at the USB COMPUTER port/
MIDI IN connector are retransmitted without change from the MIDI OUT
connector/USB COMPUTER port (ON) or are not retransmitted (OFF).
USB Driver GENERIC, VENDOR Selects the USB driver.