32 w saturator (worm saturator), Navi, Mfx list – Roland GAIA 2 37-Key Virtual Analog + Wavetable Synthesizer User Manual
Page 77: Lowfreq, Lowgain, Hi slope, Hi freq, Pre1 type, Pre1freq, Pre1gain

77
32 W Saturator (Worm Saturator)
This is a variety of saturator, and is distinctive for its warmer sound.
Balance W
Balance D
Balance D
Pre
Pre
Filter
Filter
Overdrive
Overdrive
Post
Post
Filter1-3
Filter1-3
Pre
Pre
Filter
Filter
Low/
Low/
High
High
Low/
Low/
High
High
Overdrive
Overdrive
Post
Post
Filter1-3
Filter1-3
L in
L in
L out
L out
R out
R out
R in
R in
Parameter
Value
Explanation
LowFreq
20–16000 [Hz]
An input filter (low-band audio).
Boosts/cuts the sound below the specified frequency.
LowGain
-24.0–+24.0 [dB]
An input filter (low-band audio).
This is the boost/cut amount.
Hi Slope
THRU, -12dB, -24dB
The input filter (high frequency) slope (attenuation characteristics or
amount of attenuation per octave).
THRU:
No attenuation
-12 dB:
Gentle
-24 dB:
Steep
Hi Freq
20–16000 [Hz]
An input filter (high-frequency audio).
Boosts/cuts the sound above the specified frequency.
Pre1 Type
THRU, LPF, HPF, LSV, HSV
The types of filters available before distortion processing.
THRU:
No filter is applied
LPF:
A filter that passes the sound below the specified frequency
HPF:
A filter that passes the sound above the specified frequency
LSV:
A filter that boosts/cuts the sound below the specified frequency
HSV:
A filter that boosts/cuts the sound above the specified frequency
Pre1Freq
20–16000 [Hz]
Frequency at which the pre-distortion filter operates
Pre1Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Drive
0.0–48.0 [dB]
Strength of distortion
Post1 Type
THRU, LPF, HPF, LSV, HSV
Type of filter 1 which follows the distortion processing
Post1Frq
20–16000 [Hz]
Frequency at which post-distortion filter 1 operates
Post1Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Post2 Type
THRU, LPF, HPF, LSV, HSV
Type of filter 2 which follows the distortion processing
Post2Frq
20–16000 [Hz]
Frequency at which post-distortion filter 2 operates
Post2Gain
-24.0–+24.0 [dB]
For the LSV/HSV types, the amount of boost/cut
Post3 Type
THRU, LPF, HPF, BPF, PKG
The filter types available for filter 3 after distortion processing.
THRU:
No filter is applied
LPF:
A filter that passes the sound below the specified frequency
HPF:
A filter that passes the sound above the specified frequency
BPF:
A filter that passes only the specified frequency
PKG:
A filter that boosts/cuts the specified frequency
Post3Frq
20–16000 [Hz]
Frequency at which post-distortion filter 3 operates
Post3Gain
-24.0–+24.0 [dB]
For the PKG type, the amount of boost/cut
Post3 Q
0.5–16.0
Width of the frequency range affected by the filter