Roland FP-90X Portable Digital Piano (Black) - Manual (Page 3)

3
Placing This Unit on a Stand
For the FP-60X
Be careful not to pinch your fingers when setting up the stand.
Please use one of the following Roland stands to support your FP-60X: KSC-72, KS-G8B, KS-10Z, KS-12 or KS-20X.
Refer to the following when using a stand.
KS-20X
KS-12
Adjust the horizontal width so that
the rubber feet on the bottom of
the piano fit into the depressions
(four locations) of the stand.
Top view
Adjust the horizontal width
KS-10Z
Place the Piano so that its rubber
feet are on the inner side of the
stand
Top view
Adjust the horizontal width
KS-G8B
Top view
Place the Piano so that
its rubber feet are on the
inner side of the stand
Align the center of the Piano with the center of the stand.
KSC-72
Refer to the KSC-72 Owner’s Manual.
Adjust the stand so that its width
is not less than 700 mm.
Position the piano so that
the pad at the rear of the
stand is immediately in
front of the row of screws
on the bottom of the
piano
Pad
row of
screws
Align the front of the
Piano with the front of
the stand
Align the center of the Piano with the center of the stand.
For safety, do not use the
stand in its very highest
adjustment position.
For safety, do not use the
stand in its very highest
adjustment position.
For safety, do not use the
stand in its very highest
adjustment position.
NOTE
NOTE
NOTE
NOTE
Align the front of the
Piano with the front of
the stand