Roland FP-90X Portable Digital Piano (Black) - Manual (Page 24)

24
Advanced Operation
Saving a Registration Set (Registration Set Export)
Here’s how the registration set that’s saved in this unit can be saved to a
USB flash drive.
* If you’re saving to a USB flash drive, connect your USB flash drive to the
USB Memory port before proceeding.
1
Press the [Function] button.
2
Use the [ K ] [ J ] buttons to select “Reg. Set Export.”
3
Press the [Function] (Enter) button.
The Reg. Set Export screen appears.
4
Renaming the registration set.
Button Operation
[ K ] [ J ] button Select the character to change.
[-] [+] buttons Change the character.
Insert one character Press the [ s ] button.
Delete one character Press the [ t ] button.
If you decide to cancel, press the [Exit] (Exit) button.
5
Press the [Function] (Enter) button.
The registration set is saved.
NOTE
Never turn off the power or remove the USB flash drives while the
screen indicates “Executing....”
6
Press the [Exit] button several times to exit Function mode.
Loading a Saved Registration Set (Registration Set
Import)
Here’s how a registration set saved on a USB flash drive can be loaded into
the registrations of this unit.
* If you want to load a registration set from a USB flash drive, connect
your USB flash drive to the USB Memory port before proceeding.
NOTE
Note that when you load a registration set, it will overwrite (and erase) all
of the registrations already in registration memory. If you wish to retain
your existing registrations, save them to a USB flash drive.
1
Press the [Function] button.
2
Use the [ K ] [ J ] buttons to select “Reg. Set Import.”
3
Press the [Function] (Enter) button.
The Reg. Set Import screen appears.
4
Use the [–] [+] buttons to select the registration set you
want to load.
5
Press the [Function] (Enter) button.
A confirmation message appears.
If you decide to cancel, press the [Exit] (Exit) button.
6
Use the [ J ] button to select “Yes,” and then press the
[Function] (Enter) button.
The registration set will be loaded.
NOTE
Never turn off the power or remove the USB flash drives while the
screen indicates “Executing....”
7
Press the [Exit] button several times to exit Function mode.