Roland FP-90X Portable Digital Piano (Black) - Manual (Page 22)

22
Advanced Operation
˙ Using the Microphone
You can connect a dynamic microphone (sold separately) to the Mic Input
jack and sing while playing.
Connecting a Microphone
Here’s how to connect a microphone to the Mic Input jack.
1 1 4 4
2 2
Microphone Microphone
FP-90X FP-60X
3 3
1
Move the [Mic Vol.] slider all the way down to minimize the
volume.
2
Connect the microphone to the Mic Input jack.
The microphone input will turn on.
3
If the sound of the mic is too weak or is distorted, turn the
rear panel Mic [Gain] knob to adjust the volume of the mic.
4
Move the [Mic Vol.] slider to adjust the volume of the mic.
* If the volume is excessive, you may hear noise from the speakers.
Applying an Effect to the Mic (Mic Effects)
Here’s how to apply an effect to the sound of the mic.
FP-90X
1
Press the [Mic] button.
The Mic Effects screen appears.
2
Use the [ K ] [ J ] buttons to select the effect that you want to
apply.
3
Use the [-] [+] buttons to switch the setting on/off.
FP-60X
1
Press the [Function] button to make it light.
2
Use the [ K ] [ J ] buttons to select “Mic Effects.”
3
Press the [Function] (Enter) button.
The Mic Effects screen appears.
4
Use the [ K ] [ J ] buttons to select the effect that you want to
apply.
5
Use the [-] [+] buttons to switch the setting on/off.
Adjusting the Mic Effect
Here’s how to adjust how the effect is applied.
1
In the Mic Effects screen, press the [ J ] button.
2
Adjust the effect.
Indication
[
K ] [ J ] button
Value
[-] [+] buttons
Explanation
Compressor Type Soft, Normal, Hard
Specifies the amount of the effect
that restrains the level in response
to the audio input. Soft, Normal,
and Hard settings produce a
progressively greater effect.
Doubling Type
One Voice, Two
Voice
Produces an effect as though a
singing voice is layered multiple
times.
Doubling Width Light, Normal, Deep
Specifies the pitch difference
between the layered voice and the
original sound.
Light, Normal, and Deep settings
produce progressively greater pitch
difference.
Doubling Level 0–10
Specifies the volume of the doubling
effect.
Echo Type 1–7 Selects the type of echo.
Echo Level 0–10
Higher values produce greater
reverberance.
MEMO
You can adjust the volume balance as with an audio mixer.
FP-90X
FP-60X
Piano (Part) volume Song volume Mic volume
Piano (Part) volume Mic volume