beautypg.com

Playing back or recording, Using a mic (mic), Selecting a song – Roland FP-90X Portable Digital Piano (Black) User Manual

Page 11: Operation guide, Song formats that can be played by the unit, Play/stop 1, Return to the beginning of the song 1, Change the song tempo 1, Record 1, Adjusting the volume of the song 1

background image

11

Operation Guide

Playing Back or Recording

Here’s how to play back or record a song.

Play/stop

1

Press the [

s

] button

Return to the beginning of the song

1

Press the [

u

] button

Change the song tempo

1

Use the Tempo [Slow] [Fast] buttons to change the tempo

Record

1

Select the tone that you want to play

2

You can sound the metronome if you like

You can specify the tempo and time signature of the metronome. The

metronome’s tempo and time signature settings are stored in the song, so that
the metronome plays correctly even when you play back the song.

3

Press the [

t

] button

The [

t

] button lights, the [

s

] button blinks, and the unit enters record-

standby mode.
If you decide to cancel recording, press the [

t

] button once again.

4

Press the [

s

] button to start recording

5

Press the [

s

] button to stop recording

p.

19

p.

18

Adjusting the Volume of the Song

1

Use the [Song Vol ] slider to adjust the volume of the song

This adjusts the volume of the song (SMF/audio).

Adjusting the Volume of the Song

This adjusts the volume of the song (SMF/audio).

1

Press the [Function] button

2

Use the [

K

] [

J

] buttons to select Song Vol

3

Use the [–][+] buttons to adjust the volume

FP-90X

FP-60X

* Some of the tones used in the tone demo are set to be

adjusted by the Part [Upper] [Lower] slider. If you want to use

the [Song Vol.] slider (on the FP-60X, the function mode setting

“Song Vol.”) to adjust all of the parts, change SMF Play Mode

(p. 27) to “External.”

Using a Mic (Mic)

You can connect a mic to the this unit and mix the sound of its performance with

the sound from the mic.

p.

22

Selecting a Song

Access the song screen, and select a song.

1

Press the [Song] button to access the song screen

Category

Tempo

Time signature Measure

Song name

2

Press the [

K

] [

J

] buttons to select a category

3

Press [–] [+] buttons to select a song

4

Press the [

s

] button to play the song

MEMO

To select a song from a folder on a USB flash drive, proceed as follows.

To open a folder

Use the [–] [+] buttons to select the folder, and

press the [

s

] button.

To close a folder

Use the [–] button to select “ (up)” and then press

the [

s

] button.

Category list

Category

Explanation

Preset Songs

Songs built into the piano

USB Memory

Songs saved on a USB flash drive

Internal Memory

Songs saved in internal memory

NOTE

* When the SMF Play Mode (p. 27) is set to “Auto-Select” or “Internal,” there are some

parts whose volume is not affected by the [Song Vol.] slider (on the FP-60X, the

function mode setting “Song Vol.”). If the SMF Play Mode is set to “External,” the

volume of all parts will change.

FP-90X

FP-60X

Song formats that can be played by the unit

The unit can play back data in the following formats.

Song format

Explanation

MIDI files

SMF format 0/1

Audio files

WAV format, 44.1 kHz, 16-bit linear

MP3 format, 44.1 kHz, 64 kbps–320 kbps

This manual is related to the following products: