Shooting (p, s, a, m) – Nikon D5500 User Manual
Page 378
354 Technical Notes
Shooting (P, S, A, M)
Image artifacts appear during live view
: The temperature of the camera’s
internal circuits may rise during live view, causing image “noise” in the
form of bright spots, randomly-spaced bright pixels, or fog. Exit live view
when the camera is not in use.
Flicker or banding appears during live view or movie recording
: Choose an option
for Flicker reduction that matches the frequency of the local AC power
supply (
Bright bands appear during live view or movie recording
: A flashing sign, flash, or
other light source with brief duration was used during live view or movie
recording.
Menu item can not be selected
: Some options are not available in all modes.
Shutter-release disabled
:
• Non-CPU lens is attached: rotate camera mode dial to M (
• Mode dial rotated to S after shutter speed of “Bulb” or “Time” selected
in mode M: choose new shutter speed (
• If white-balance bracketing is active, shutter release will be disabled
and viewfinder exposure-count display will flash if there is insufficient
space on memory card to record all images in bracketing sequence.
Insert new memory card.
Full range of shutter speeds not available
:
• Flash in use (
• When On is selected for Movie settings > Manual movie settings in
the shooting menu, the range of available shutter speed varies with the
frame rate (
0 179).
Can not select desired aperture
: Range of available apertures varies with lens
used.
Colors are unnatural
:
• Adjust white balance to match light source (
• Adjust Set Picture Control settings (