Self-timer, Select (self-timer) by turning the drive mode dial, Adjust the focus and shoot the image – Sony Alpha 9 User Manual
Page 82
ILCE-9
4-692-676-11 (2)
C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08
GB
82
Self-timer
Shoots an image using the self-timer after a designated number of
seconds have elapsed since the shutter button was pressed. Use the
5-second/10-second self-timer when you are going to be in the picture,
and use the 2-second self-timer to reduce camera-shake caused by
pressing the shutter button.
1
Select (Self-timer) by turning the drive mode dial.
• Turn the drive mode dial while holding down the drive mode dial lock
release button.
2
MENU
(Camera Settings 1)
[Self-timer Type]
[Self-timer (Single)]
desired mode.
The mode determines the number of seconds until a picture is taken
after the shutter button is pressed.
• The setting screen for [Self-timer Type] can be displayed by pressing
the Fn button.
Self-timer (Single): 10 Sec
Self-timer (Single): 5 Sec
Self-timer (Single): 2 Sec
3
Adjust the focus and shoot the image.
The self-timer lamp flashes, a beep sounds, and a picture is taken after
the designated number of seconds have elapsed.
Hint
• Press the shutter button again to stop the count of the self-timer.
• Select a drive mode other than
(Self-timer) by turning the drive mode dial
to cancel the self-timer.
• Set [Audio signals] to [Off] to mute the beep sound during self-timer counting.
• To use the self-timer in bracket mode, select
(Bracket) by turning the drive
mode dial, then select MENU
(Camera Settings 1)
[Bracket Settings]
[Selftimer during Brkt].