Movie: exposure mode, Set the mode dial to (movie), Press the movie (movie) button to start recording – Sony Alpha 9 User Manual
Page 104
ILCE-9
4-692-676-11 (2)
C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08
GB
104
Hint
• To recall settings registered to the memory card, set the mode dial to 1, 2 or 3,
then select the desired number by pressing the left/right side of the control
wheel.
• If you recall settings registered to the memory card, the settings are recalled
from the memory card in the slot specified in [Select Rec. Media]. You
can confirm the memory card slot by selecting MENU
(Setup)
[Select Rec. Media].
• Settings registered to a memory card using another camera of the same
model name can be recalled with this camera.
Note
• If you set [
/
Recall] after completing the shooting settings, the
registered settings are given priority and the original settings may become
invalid. Check the indicators on the screen before shooting.
Movie: Exposure Mode
You can select the exposure mode for movie shooting.
1
Set the mode dial to (Movie).
2
MENU
(Camera Settings 2)
[ Exposure Mode]
desired setting.
Program Auto: Allows you to shoot with the exposure adjusted
automatically (both the shutter speed and the aperture value).
Aperture Priority: Allows you to shoot after adjusting the aperture
value manually.
Shutter Priority: Allows you to shoot after adjusting the shutter
speed manually.
Manual Exposure: Allows you to shoot after adjusting the
exposure (both the shutter speed and the aperture value) manually.
3
Press the MOVIE (movie) button to start recording.
• Press the MOVIE (movie) button again to stop recording.