Adjust the focus and shoot the subject – Sony Alpha 9 User Manual

Page 101

C:\4692676112\4692676112ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2017/03/15 14:08

ILCE-9
4-692-676-11 (2)

101

Shoo

ting

Select the desired aperture value by turning the front dial.
Select the desired shutter speed by turning the rear dial.

• You can change the setting of the front/rear dial using MENU



(Camera Settings 2)

 [Dial Setup].

• You can also set [ISO] to [ISO AUTO] in manual exposure mode. The

ISO value automatically changes to achieve the appropriate exposure
using the aperture value and shutter speed you have set.

• When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if

the value you have set is not suitable for appropriate exposure. If this
happens, change the shutter speed or aperture value.

• When [ISO] is set to other than [ISO AUTO], use MM (Metered

Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.

* Indicates under/over for appropriate exposure. It is displayed using

a numerical value on the monitor and with a metering indicator on
the viewfinder.

Adjust the focus and shoot the subject.

Hint

• You can change the shutter speed and aperture (F-value) combination

without changing the set exposure value by rotating the front/rear dial while
pressing the AEL button. (Manual shift)

Note

• The Metered Manual indicator does not appear when [ISO] is set to

[ISO AUTO].

• When the amount of ambient light exceeds the metering range of the

Metered Manual, the Metered Manual indicator flashes.

• The SteadyShot warning indicator does not appear in manual exposure mode.

• The brightness of the image on the screen may differ from the actual image

being shot.