Yamaha PSR-S670 - Manual (Page 85)

PSR-S670 Owner’s Manual 85
R
e
gi
str
a
tio
n
Memor
y –
Sa
vi
ng and
R
e
c
a
lli
n
g Cust
o
m
P
ane
l Se
tups –
7
The saved Registration Memory Bank files can be recalled by using the REGIST
BANK [-]/[+] buttons or the following procedure.
1
Press the REGIST BANK [+] and [-] buttons simultaneously to
call up the REGISTRATION BANK Selection display.
2
Move the cursor to the desired Bank by the Cursor buttons
[][][E][F], then press the [ENTER] button.
3
Press one of the green-lit numbered buttons ([1] – [8]) in the
Registration Memory section.
Recalling a Registered Panel Setup
NOTE
• When recalling the setups including
file selection of Song, Style, text,
etc. from a USB flash drive, make
sure that the appropriate USB flash
drive including the registered Song/
Style is connected into the [USB TO
DEVICE] terminal.
• Before using a USB flash drive, be
sure to read “Connecting USB
Devices” on page 91.
NOTE
Turning the [FREEZE] button on can
disable recall of specific item(s). For
instructions, refer to the Reference
Manual on the website.
Confirming the Registration Memory Information
In the REGISTRATION BANK Selection display, press the [6 ] (INFO)
button to call up the Information window, showing which Voices and Style are
memorized to the [1] – [8] buttons of a Registration Memory Bank.
NOTE
Make sure that MENU 1 is shown at the bottom right corner of the display (page 24).
By using the TAB [E][F] buttons, you can switch between the two Information
display pages: information for the Registration Memory [1] – [4] buttons and
information for the [5] – [8] buttons.
NOTE
If a Voice part name (R1/R2/L) is grayed out, this indicates that the corresponding Voice part is turned off when
pressing the REGISTRATION MEMORY [1] – [8] buttons.
To close the window, press the [8 ] (CLOSE) button.
Advanced Features
Refer to the Reference Manual on the website, Chapter 7.
Disabling recall of specific items (Freeze): [FUNCTION]  MENU 1  REGIST SEQUENCE/FREEZE
 [ENTER]  FREEZE
Calling up Registration
Memory numbers in order (Registration
Sequence):
[FUNCTION]  MENU 1  REGIST SEQUENCE/FREEZE
 [ENTER]  REGISTRATION SEQUENCE