Yamaha PSR-S670 User Manual
Page 76
76
PSR-S670 Owner’s Manual
You can create a new Multi Pad by making links with WAVE files in the USB flash
drive to each of the Multi Pad. The WAVE files can be data you’ve recorded on this
instrument (page 69) as well as commercially available ones. Multi Pads to which
WAVE files have been linked are called Audio Link Multi Pads. The new Audio
Link Multi Pads can be saved to the USER drive or USB flash drive.
1
Connect the USB flash drive containing the WAVE files to the
[USB TO DEVICE] terminal.
2
Press the MULTI PAD CONTROL [SELECT] button to call up the
Multi Pad Bank Selection display.
3
Press the [6 ] (AUDIO LINK) button to call up the AUDIO LINK
MULTI PAD display.
A confirmation message may appear here. If so, follow the on-display
instructions.
4
Select the desired Pad by using the Cursor buttons [][], then
press the [ENTER] button.
The WAVE File Selection display appears.
5
Move the cursor to the desired WAVE file by using the Cursor
buttons [][][E][F], then press the [ENTER] button.
6
Press the [EXIT] button to return to the AUDIO LINK MULTI PAD
display.
Creating a Multi Pad with WAVE files (Audio Link Multi Pad)
NOTE
Audio Link Multi Pads can neither be
created nor played back during play-
back, recording standby or recording
of audio files.
NOTE
Before using a USB flash drive, be sure
to read “Connecting USB Devices” on
page 91.
NOTE
Make sure that MENU 1 is shown at
the bottom right corner of the display
(page 24).
NOTE
A WAVE file cannot be linked to a MIDI
Multi Pad.
4
NOTE
If an Audio Link Multi Pad has been
selected when you press the [6
]
(AUDIO LINK) button in step 3, the
links made for the selected Pad appear.
In order to create a new Pad, make
sure to press one of the [1
]/[2
] (NEW BANK) buttons. Other-
wise, you are simply re-selecting the
link in the selected Pad.
To confirm the information of the selected WAVE file
By pressing [6 ] (INFO) button in the WAVE File Selection display, you can
confirm the information (title name, bit rate and sample rate, etc.). Press one of
the [7 ]/[8 ] (OK) buttons to close it.
To confirm the path of the selected WAVE file
By using the [7 ] (INFO) buttons in the AUDIO LINK MULTI PAD display,
you can confirm the path. Use the [7 ]/[8 ] (OK) buttons to close it.
NEXT PAGE