ProSoft Technology MVI56-DFCMR - Manual (Page 86)

MVI56-DFCMR ♦ ControlLogix Platform Reference
DF1 Interface Module with Reduced Data Block
Page 86 of 113 ProSoft Technology, Inc.
October 20, 2008
Offset Content Description
14 Port 1 Responses This field contains the total number of messages received on
the port.
15 Port 1 Errors Sent This field contains the total number of message errors sent out
of the port.
16 Port 1 Errors
Received This field contains the total number of message errors
received on the port.
17 Port 2 Command
List Requests This field contains the number of requests made from this port
to slave devices on the network.
18 Port 2 Command
List Response This field contains the number of slave response messages
received on the port.
19 Port 2 Command
List Errors This field contains the number of command errors processed
on the port. These errors could be due to a bad response or
command.
20 Port 2 Requests This field contains the total number of messages sent out the
port.
21 Port 2 Responses This field contains the total number of messages received on
the port.
22 Port 2 Errors Sent This field contains the total number of message errors sent out
of the port.
23 Port 2 Errors
Received This field contains the total number of message errors
received on the port.
24 Read Block Count This field contains the total number of read blocks transferred
from the module to the processor.
25 Write Block Count This field contains the total number of write blocks transferred
from the processor to the module.
26 Parse Block Count This field contains the total number of blocks successfully
parsed that were received from the processor.
27 Command Event
Block Count This field contains the total number of command event blocks
received from the processor.
28 Command Block
Count This field contains the total number of command blocks
received from the processor.
29 Error Block Count This field contains the total number of block errors recognized
by the module.
30 Port 1 Current Error For a slave port, this field contains the value of the current
error code returned. For a master port, this field contains the
index of the currently executing command.
31 Port 1 Last Error For a slave port, this field contains the value of the last error
code returned. For a master port, this field contains the index
of the command with an error.
32 Port 2 Current Error For a slave port, this field contains the value of the current
error code returned. For a master port, this field contains the
index of the currently executing command.
33 Port 2 Last Error For a slave port, this field contains the value of the last error
code returned. For a master port, this field contains the index
of the command with an error.
34 to 40 Spare Reserved for future use.
41 Read Blk ID Read block ID 0 or -1 to indicate this block contains status
data.