beautypg.com

ProSoft Technology MVI56-DFCMR User Manual

Page 80

background image

MVI56-DFCMR ♦ ControlLogix Platform

Reference

DF1 Interface Module with Reduced Data Block

Page 80 of 113

ProSoft Technology, Inc.

October 20, 2008

1

Open RSLinx and go to Communications>RSWho

2

Make sure that you are not actively browsing using the driver that you wish to
stop. The following shows an actively browsed network:

3

Notice how the DF1 driver is opened, and the driver is looking for a processor
on node 1. If the network is being browsed, then you will not be able to stop
this driver. To stop the driver your RSWho screen should look like this:

Branches are displayed or hidden by clicking on the or the icons.

4

When you have verified that the driver is not being browsed, go to

Communications>Configure Drivers

You may see something like this: