ProSoft Technology MVI56-DFCMR - Manual (Page 34)

MVI56-DFCMR ♦ ControlLogix Platform Installing and Configuring the Module
DF1 Interface Module with Reduced Data Block
Page 34 of 113 ProSoft Technology, Inc.
October 20, 2008
Register Content Description
7623 Read Block Count This field contains the total number of read blocks
transferred from the module to the processor.
7624 Write Block Count This field contains the total number of write blocks
transferred from the processor to the module.
7625 Parse Block Count This field contains the total number of blocks
successfully parsed that were received from the
processor.
7626 Command Event Block
Count This field contains the total number of command
event blocks received from the processor.
7627 Command Block Count This field contains the total number of command
blocks received from the processor.
7628 Error Block Count This field contains the total number of block errors
recognized by the module.
7629 Port 1 Current Error/Index For a slave port, this field contains the value of the
current error code returned. For a master port, this
field contains the index of the currently executing
command.
7630 Port 1 Last Error/Index For a slave port, this field contains the value of the
last error code returned. For a master port, this field
contains the index of the command with an error.
7631 Port 2 Current Error/Index For a slave port, this field contains the value of the
current error code returned. For a master port, this
field contains the index of the currently executing
command.
7632 Port 2 Last Error/Index For a slave port, this field contains the value of the
last error code returned. For a master port, this field
contains the index of the command with an error.
2.2.7 Command Control
Register Content Description
7800 Command Code Enter one of the valid control command codes in this
register to control the module (9997, 9998 or 9999).
Refer to Command Control Blocks (page 34, page
71, page 70, page 71, page 71).
7801 to 7999 Command Data Reserved for future use
2.2.8 Port 1 Override File Maps
Register Content Description
8000 to 8003 File Map #1 This set of registers contains the first override file map for
the slave port.
8004 to 8007 File Map #2 This set of registers contains the second override file map
for the slave port.
-
8196 to 8199 Command # 50 This set of registers contains the last override file map for
the slave port.