ProSoft Technology MVI56-DFCMR - Manual (Page 19)

Start Here MVI56-DFCMR ♦ ControlLogix Platform
DF1 Interface Module with Reduced Data Block
ProSoft Technology, Inc. Page 19 of 113
October 20, 2008
1.8 Connect your PC to the Module
With the module securely mounted, connect your PC to the
Configuration/Debug
port using an RJ45-DB-9 Serial Adapter Cable and a Null
Modem Cable.
1 Attach both cables as shown.
2 Insert the RJ45 cable connector into the Configuration/Debug port of the
module.
3 Attach the other end to the serial port on your PC or laptop.