ProSoft Technology MVI69-DNP - Manual (Page 74)

MVI69-DNP ♦ CompactLogix or MicroLogix Platform Reference
DNP 3.0 Master/Slave Communication Module
Page 74 of 129 ProSoft Technology, Inc.
November 3, 2008
Data Area Blocks
PLC DATA 0 to 7 BINARY INPUTS
IED DATA
PLC DATA 8 to 15 BINARY OUTPUTS
IED DATA
PLC DATA 16 to 23 COUNTER DATA
IED DATA
PLC DATA 24 to 31 ANALOG INPUTS
IED DATA
PLC DATA 32 to 39 ANALOG OUTPUTS
IED DATA
FLOAT INPUTS PLC DATA 80 to 87
DOUBLE INPUTS PLC DATA 88 to 95
FLOAT OUTPUTS PLC DATA 96 to 103
DOUBLE OUTPUTS PLC DATA 104 to 111
FROZEN COUNTER DATA
BINARY INPUT EVENTS
ANALOG INPUT EVENTS
FLOAT INPUT EVENTS
DNP DATA
DOUBLE INPUT EVENTS
BINARY INPUTS
ANALOG INPUTS
FLOAT INPUTS
DOUBLE INPUTS
DNP BIN OUTPUTS
DNP ANAL OUTPUTS
IED BIN OUTPUTS
LAST VALUE DATA
IED ANAL OUTPUTS
BINARY INPUTS 40 to 47
BINARY OUTPUTS 48 to 55
COUNTER DATA 56 to 63
ANALOG INPUTS 64 to 71
IED DATA
ANALOG OUTPUTS 72 to 79
BINARY INPUT RBE FLAGS
ANALOG INPUT
Data contained in this database is paged through the input and output images by
coordination of the CompactLogix ladder logic and the MVI69-DNP module's
program. Up to 64 words of data can be transferred from the module to the
processor at a time. Up to 64 words of data can be transferred from the
processor to the module. The read and write block identification codes in each
data block determine the function to be performed or the content of the data
block. The module uses the following block numbers: