PLANET WNAP-7335 - Manual (Page 92)

User Manual of WNAP-7325/WNAP-7335
-91-
Step 8. Click “SET SECURITY” to configure the Pre-Shared Key and then click “Save” to close the window.
Step 9. Click “OK” and click “Save & Restart” to apply the setting.
Step 10. In AP-1, go to “Device Status-> Wireless Client Table” to check whether AP-2 should be in the list.
Step 11. Use command line tool to ping each other to ensure the link is successfully established.
From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100.