2 time settings, Time settings, Igure – PLANET WNAP-7335 User Manual
Page 61: Ettings
User Manual of WNAP-7325/WNAP-7335
-60-
The page includes the following fields:
Object
Description
IP Address
Access Point’s LAN IP.
The default is 192.168.1.253. You can change it according to your
needs.
IP Subnet Mask
Access Point’s LAN subnet mask.
Gateway IP Address
The Gateway IP address of Access Point.
Primary DNS Server
Enter the DNS server. The default is 8.8.4.4.
Secondary DNS Server
Enter the DNS server. The default is 8.8.8.8.
5.2.2 Time Settings
Click “System Configuration” “Time Settings” and the following page will be displayed.
Figure 5-35 Time Settings
Object
Description
Enable NTP
Enable it to support NTP (Network Time Protocol) for automatic time
and date setup.
Server Name
Enter the host name or IP address of the time server if you wish.
NTP Request Interval
Specify a frequency (in hours) for the access point to
update/synchronize with the NTP server.
Local Time Zone
Select the time zone of your country/region. If your country/region is
not listed, please select another country/region whose time zone is
the same as yours.
Local Date and Time
Set the access point’s date and time manually.