8 advanced settings, Advanced settings, Igure – PLANET WNAP-7335 User Manual
Page 44: Dvanced, Ettings
User Manual of WNAP-7325/WNAP-7335
-43-
5.1.8 Advanced Settings
Choose the operation mode you require, and then enter “Advanced Settings” by clicking the Setup button next
to it and the following page will be displayed. This section allows you to configure the wireless advanced
settings.
Figure 5-17 Advanced Settings
Object
Description
RTS/CTS
Threshold
When the length of a data packet exceeds this value, the router will send
an RTS frame to the destination wireless node, and the latter will reply
with a CTS frame, and thus they are ready to communicate. The default
value is 2347.
Beacon Interval
Set beacon interval, the value range is from 20 to 999. The default value
is 100.
DTIM
Set the DTIM (delivery traffic indication message) period value of the
wireless radio. The default value is 1.
Fragment Size
A data packet that exceeds this value in length will be divided into
multiple packets. The number of packets influences wireless network
performance. Avoid setting this value low. Default at 2346.