PLANET WNAP-7335 - Manual (Page 34)

User Manual of WNAP-7325/WNAP-7335
-33-
 Site Survey Click “Site Survey” to find the remote sites to associate.
 Enable Wireless Check it to enable Wireless function.
 Disable SSID Broadcasting Check it to disable SSID broadcasting.
Enable Isolated
Check it to isolate each connected wireless clients so that they
cannot access each other.
Lock to AP MAC Enter the Mac address of the remote AP.
Radio Mode
Select the channel width to “Auto Select”, “5G 11NA HT20” or
“5G 11NA HT40”
 Data Rate
Select MCS0~15 or Auto from the pull-down menu. The default
is “Auto”.
 Security Setting
Press “Setup” for more configurations. Please refer to 5.1.7
Security Setting for more information.
 Transmit Power
The range of transmit power is “12~27 dbm”. In case of
shortening the distance and the coverage of the wireless
network, input a smaller value to reduce the radio transmission
power.
 Transmit Distance Select a specified distance of the two nodes.
 TDMA Displays the System Time.
 Advanced Settings
Press “Setup” for more configurations. Please refer to 5.1.8
Advanced Settings for more information.
 Access Control
Press “Setup” for more configurations. Please refer to 5.1.9
Access Control for more information.