PLANET WNAP-7335 - Manual (Page 13)

User Manual of WNAP-7325/WNAP-7335
-12-
RF Output Power (dBm)
802.11a: up to 26 ± 1
802.11n: up to 25 ± 1
Receiver Sensitivity
(dBm)
802.11a: -94 dBm
802.11n: -93 dBm
Output Power Control 12~27dBm
Power Consumption 12W
Power Requirements
LAN 24VDC, 1A/ Passive PoE
Pin 4,5 VDC+
Pin 7,8 VDC-
Pin 3 Reset
Environment & Certification
Operating Temperature -20~70°c
Operating Humidity 10~95% non-condensing
IP Level IP55
Regulatory CE, FCC, RoHS
Software
Built-in DHCP server supporting static IP address distribution
LAN
Support 802.1d STP (Spanning Tree)
WAN
 Static IP
 Dynamic IP
 PPPoE
Operation Modes
 Bridge
 WISP
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Virtual Server, and DMZ Firewall
Built-in firewall with Port/ IP address/ MAC/ URL filtering
Wireless Modes
 AP
 Client
 WDS PTP
 WDS PTMP
 WISP
Channel Width 20MHz / 40MHz
Wireless Isolation
Enable it to isolate each connected wireless client so that they cannot access
mutually.
Encryption Type 64/128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1X
Provides wireless LAN ACL (Access Control List) filtering
Wireless MAC address filtering Wireless Security
Enable/Disable SSID Broadcast
Max. Wireless Clients 25
Max. WDS Peers 8
Max. Wired Clients 60