beautypg.com

PLANET WNAP-7335 User Manual

Page 86

background image

User Manual of WNAP-7325/WNAP-7335

-85-

Step 10. In AP-1, go to “Device Status-> Wireless Client Table” to check whether AP-2 should be in the list.

Step 11. Use command line tool to ping each other to ensure the link is successfully established.

From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100.

Step 12. Configure the TCP/IP settings of Site-2 to “Obtain an IP address automatically”.

This manual is related to the following products:
See also other documents in the category PLANET Routers: