10 wan port settings, Wan port settings, Igure – PLANET WNAP-7335 User Manual
Page 48: Ettings, Dhcp, Tatic
User Manual of WNAP-7325/WNAP-7335
-47-
5.1.10 WAN Port Settings
Click “Operation Mode” “AP Router” or “Wireless ISP” and then enter the “WAN Port Settings” by clicking
the Setup button next to it. This section allows you to configure the internet connection settings.
DHCP (Auto Config)
Choose “DHCP” and the router will automatically obtain IP addresses, subnet masks and gateway addresses
from your ISP.
Figure 5-20 WAN Port Settings – DHCP
Static Mode (Fixed IP)
If your ISP offers you static IP Internet connection type, select “Static Mode" and then enter IP address, subnet
mask, primary DNS and secondary DNS information provided by your ISP in the corresponding fields.
Figure 5-21 WAN Port Settings – Static IP
Object
Description
IP Address
Assigned by
Enter the WAN IP address provided by your ISP. Enquire your ISP if you
are not clear.