13 dhcp server settings, 14 dmz settings, Dhcp server settings – PLANET WNAP-7335 User Manual
Page 55: Dmz settings, Igure, Dhcp, Erver, Ettings
User Manual of WNAP-7325/WNAP-7335
-54-
5.1.13 DHCP Server Settings
Click “Operation Mode” “AP Router” or “Wireless ISP” and then enter the “DHCP Server Settings” by
clicking the Setup button next to it. This section allows you to configure the DHCP server.
Figure 5-25 DHCP Server Settings
Object
Description
DHCP Server
Select as DHCP server or disable the function.
Lease Time
Select the time for using one assigned IP from the dropdown
list. After the lease time, the AP automatically assigns new IP
addresses to all connected computers.
From
The start IP address of all the available successive IPs.
To
The end IP address of all the available successive IPs.
5.1.14 DMZ Settings
Click “Operation Mode” “AP Router” or “Wireless ISP” and then enter the “DMZ Settings” by clicking the
Setup button next to it. This section allows you to configure the DMZ server.
Figure 5-26 DMZ Settings