PLANET WNAP-7335 - Manual (Page 59)

User Manual of WNAP-7325/WNAP-7335
-58-
Service
 Type Select QoS type IP Address or Mac Address.
 Local IP Address The IP address segment which uses this QoS rule.
 MAC Address The Mac address which uses this QoS rule.
 Uplink BandWidth
(Kbps)
Set the maximum uplink bandwidth allowed by the listed QoS rules.
 Downlink
BandWidth (Kbps)
Set the maximum downlink bandwidth allowed by the listed QoS rules.
 Comment Set a name for the rule.
5.1.20 SNMP
Click “Operation Mode”  “AP Router” or “Wireless ISP” and then enter the “SNMP” by clicking the Setup
button next to it. This section allows you to configure the SNMP.
Figure 5-32 SNMP Settings
Object Description
 SNMP Enable or disable the SNMP service.
 Read Community
Enter a Read Community name for verification with the SNMP manager
for SNMP Read requests.
 Write Community
Enter a Write Community name for verification with the SNMP manager
for SNMP Write requests.
 Trap IP 1 Enter the Trap IP address.
 Trap Community
Enter an SNMP Trap Community name for verification with the SNMP
manager for SNMP Trap requests.