PLANET WNAP-7335 - Manual (Page 57)

User Manual of WNAP-7325/WNAP-7335
-56-
Figure 5-28 IP Filtering Settings
Object Description
 Filtering Enable or disable IP Filtering.
 Protocol You can choose TCP, UDP or Both.
 IP Address Enter the IP address to be filtered.
 Comment Set a name for the rule.
5.1.17 Port Filtering Settings
Click “Operation Mode”  “AP Router” or “Wireless ISP” and then enter the “Port Filtering Settings” by
clicking the Setup button next to it. This section allows you to configure the port filtering settings.
Figure 5-29 Port Filtering Settings
Object Description
 Filtering Enable or disable IP Filtering.
 Protocol You can choose TCP, UDP or Both.
 Port Range Enter the range of Port to be filtered.
 Comment Set a name for the rule.