PLANET WNAP-7335 - Manual (Page 52)

User Manual of WNAP-7325/WNAP-7335
-51-
Step 3. Go to “Remote Management” to enable remote access from WAN port.
Step 4. Go to “WAN Port Settings” to configure WAN connection to Static Mode (fixed IP).
Step 5. Save the setting and connect your WAN port of the Wireless AP to the internet via Ethernet cable.
In a remote computer, enter the DDNS host name as the figure shown below. Then, you should be able to login
the WNAP-7325 remotely.
Example of Easy DDNS Settings:
This service is not required to register any DDNS account.