PLANET WNAP-7335 - Manual (Page 63)

User Manual of WNAP-7325/WNAP-7335
-62-
Figure 5-37 System Management
Object Description
 Device Name Enter a name for this access point. Default is WNAP-7325 or
WNAP-7335.
 POE Passthrough
Enable the POE Passthrough function.
※ When the option “Enable POE Passthrough” in the System
Management page is checked, the LAN2 can supply passive PoE
power to the second WNAP-7325 or WNAP-7335 through the LAN 2.
 UPnP Check to enable the UPnP function.
The UPnP feature allows the devices, such as Internet computers,
to access the local host resources or devices as needed. UPnP
devices can be automatically discovered by the UPnP service
application on the LAN. This option is only available in AP
Router mode.
 Syslog
Check to enable Syslog function.
 IGMP
Check to enable the IGMP Proxy function.
This option is only available in AP Router mode.
5.2.5 Ping Watchdog
Click “System Configuration”  “Ping Watchdog” and the following page will be displayed.