PLANET WNAP-7335 User Manual
Page 18
User Manual of WNAP-7325/WNAP-7335
-17-
H/W Interface Definition
Object
Description
PoE LAN
(Passive PoE)
10/100Mbps RJ45 port , auto MDI/ MDI-X and passive PoE supported
Connect LAN port to the PoE injector to power on the device.
Pin assignment:
Pin 4, 5 (+)
Pin 7, 8 (-)
Pin 3 (Reset)
LAN 2
10/100Mbps RJ45 port , auto MDI/ MDI-X
Connect this port to the network equipment.
※
When the option “Enable POE Pass Through” on the System
Management page is checked, the LAN2 can supply passive PoE power to the
second WNAP-7325 or WNAP-7335 through LAN 2.
Reset
Press the Reset button on the device or on the PoE injector over 5
seconds to return to factory default setting.
※
If you have connected with the ELA-100, please DO NOT press the
reset button on the PoE injector to prevent the ELA-100 from being
damaged.
Table 2-2 The PoE Injector Indication