2 starting setup in the web ui, Starting setup in the web ui, Igure – PLANET WNAP-7335 User Manual
Page 27: Ailed result of, Ing command, Ogin by default, Address
User Manual of WNAP-7325/WNAP-7335
-26-
Figure 4-4 Failed result of Ping command
If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your AP. Some
firewall software programs may block a DHCP request on newly installed adapters.
4.2 Starting Setup in the Web UI
It is easy to configure and manage the WNAP-7325 or WNAP-7335 with the web browser.
Step 1. To access the configuration page, open a web browser and enter the default IP address
web address field of the browser.
Figure 4-5 Login by default IP address
After a moment, a login window will appear. Enter admin for the User Name and Password, both in lower case
letters. Then click the OK button or press the Enter key.