PLANET WNAP-1120 - Manual (Page 39)

3.7 MAC Filtering
Enabling the MAC Filtering feature would allow only authorized clients associating to the
Access Point.
Parameter Description
MAC Address Filtering Table This table records the MAC addresses of wireless stations you
allow to access your network. The “Comment” field is the
description of the wireless station and is helpful for you to
recognize the wireless station.
Enable Wireless Access Control Enable or disable the MAC Address Filtering function.
Add MAC address into the table In the bottom “New” area, fill in the “MAC Address” and
“Comment” of the wireless station, and then click “Add”. This
wireless station will be added into the “MAC Address Filtering
Table” above.
Remove MAC address from the table If you want to remove a MAC address from the “MAC Address
Filtering Table”, select the MAC address in the table and then
click “Delete Selected”. If you want to remove all MAC
addresses from the table, just click “Delete All” button.
Reset Click “Reset” will clear your current selections.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press “Continue” for
configure other settings or “Apply” to restart WNAP-1120 with new configuration.
39