PLANET WNAP-1120 - Manual (Page 13)

3.2 Basic Setting
In this screen, you can configure WNAP-1120 to work in different operating mode. Please refer
to below sections to know the details configuration of each operating mode.
3.2.1 AP Mode
This mode is set to WNAP-1120 by default. It served as a transparent Media Access Control
(MAC) bridge between wired and wireless network.
Parameter Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the WNAP-1120 to operate in 802.11b only.
2.4GHz (G): It forces the WNAP-1120 to operate in 802.11g only.
2.4GHz (B+G): It allows the WNAP-1120 to operate in 802.11b and 802.11g
simultaneously.
MAIN ESSID The ESSID (up to 32 printable ASCII characters) is the unique name identified in a
WLAN. The ID prevents the unintentional merging of two co-located WLAN. Please
make sure that the ESSID of all stations in the same WLAN network are the same.
The default value is “default”.
Multiple ESSID The access point supports multiple SSID function; up to four SSIDs can be set. If
you want to configure additional SSIDs, please click this button. For detailed
descriptions of the function, please refer to Section 3-2-1-1.
Channel Number Select the appropriate channel from the list provided to correspond with your
network settings. Channels differ from country to country.
Channel 1-11 (North America)
Channel 1-14 (Japan)
Channel 1-13 (Europe)
13