PLANET WNAP-1120 - Manual (Page 17)

Parameter
Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the WNAP-1120 to operate in 802.11b only.
2.4GHz (G): It forces the WNAP-1120 to operate in 802.11g only.
2.4GHz (N): It forces the WNAP-1120 to operate in 802.11n only.
2.4GHz (B+G): It allows the WNAP-1120 to operate in 802.11b and
802.11g simultaneously.
2.4GHz (B+G+N): It allows the WNAP-1120 to operate in 802.11b,
802.11g, and 802.11n simultaneously.
ESSID Please make sure the ESSID of the wireless network that you will connect
and enter the correct value in this field. The default SSID is “default”.
WLAN MAC Keep default setting: WNAP-1120 will use its own MAC address to
access the wireless LAN.
Press “MAC Clone” button: It will use PC’s MAC address to access the
wireless LAN.
After configuration complete, please click “Apply” button to save the configuration. Then you will
see a screen to prompt you the settings are saving successfully. You may press “Continue” for
configure other settings or “Apply” to restart WNAP-1120 with new configuration.
3.2.3 AP Bridge - Point to Point Mode
This function allows WNAP-1120 to bridge 2 wired Ethernet networks wirelessly.
Parameter
Description
Mode Shows the current operation mode.
Band 2.4GHz (B): It forces the WNAP-1120 to operate in 802.11b only.
2.4GHz (G): It forces the WNAP-1120 to operate in 802.11g only.
17